Category: Blogging

Categories
"Eye on Nature" Announcements Blogging Chester County Coatesville Delaware HDR Photography Rivers Wilmington

Might Be Seen in the Delaware Art Museum

Image for the Delaware Art Museum - "Eye on Nature" - Andrew Wyeth/John Ruskin
Image for the Delaware Art Museum - "Eye on Nature" - Andrew Wyeth/John Ruskin

I am not one that highlights my achievements too much, and I am sure it has cost me some views over the years.

Anyhow, to start the story of this adventure off, one has to go back to early December, when I received an email with the subject of “Image of Brandywine”, and the following thumbnail image.

Fall (2011) image taken of the Brandywine River in Hibernia Park in Chester County PA.
Fall (2011) image taken of the Brandywine River in Hibernia Park in Chester County PA.

In the email, Margaretta said she was one of the curators at the Delaware Art Museum, and she was working with a exhibition designer, Keith, who had found my image online, and they were wondering if I would be interested in allowing the museum to use my image in a exhibition called “Eye on Nature“, comparing Andrew Wyeth and John Ruskin from March 10-27, 2018.

Also included with the email was a PDF file of proposed design layouts, and my image was already included, at a 11 feet by 17 feet!

After finishing the email, I had to walk around to catch my breath, and after a few minutes, I showed the email to my wife, and pointed to the address at the bottom.

Could this really be true?

The next day, I called the phone number provided, and the voicemail confirmed the name in the email, but I could only leave a message.

I did follow-up with an email, and the next day Margaretta followed up with a date and time to chat more about the exhibition.

As the day and time we agreed on, drew nearer, I was becoming more nervous, and when I finally made the call, I made sure that I had a large glass of water with me, so that I would not be too parched during the conversation.

Margaretta and I chatted for some time about the details of the exhibition, the exhibition designer and what I was looking for in compensation.

I remember blurting out a number, and I got the sense that I had blown the opportunity, but she responded back “Normally, I do not deal with living artists, but I’ll look into it.”

Internally, I giggled – “Normally, I do not deal with living artists…”

A couple of day pasted, and I had a change to speak with Keith the exhibition designer, and indeed confirmed the output size: 11 x 17 feet!

I told him of my printing background, but I had never dealt with anything of that size, but I knew of a technique that might allow me to get size required.

At this point, I was still not internally sure if I was in a dream or not, but after another phone call with Margaretta, and a couple days a waiting a check arrived from the museum!

My thought, “Hold S***, this is for REAL!!”

Now I had to start working on getting the image ready for Keith the exhibition designer.

At first, I corrected some image issues on the original image file that were cosmetic in nature because of my use of several images (ghosting), and then I began to tweak some of the various tones, basically reducing some of the ‘hot spots’, and eventually, I created the following image.

Image for the Delaware Art Museum - "Eye on Nature" - Andrew Wyeth/John Ruskin exhibition
Image for the Delaware Art Museum – “Eye on Nature” – Andrew Wyeth/John Ruskin exhibition

Now, the fun part… Getting the image to the right size… 11 x 17 feet…

I used the basic technique that I have outlined before (See my post “Fine Art prints done local“, section “Going Big”), but instead of 110%, I used 105%.

I created a Photoshop action, and repeated, and repeated until Photoshop crashed, and corrupted the image.

In troubleshooting the crash, I found out that I had filled my 128 GB SSD drive used for the Photoshop scratch/VM file! (My machine has 32 GBs of physical RAM)

In Photoshop, I re- targeted the scratch/VM file to one of my 4 TB hard drives and began the resizing again.

After numerous resizes, and quick “save-as” files, I finally reached 16.57 x 11.0 feet or 198.887 x 132.733 inches or 19889×13273 pixels (@300 dpi)!

Within the file, I still had a couple of correction layers, but the file size was approximately 19.2 GBs! By FAR the largest single file I have ever worked on, and had to save it a PSB file (See my post “Large Image Files – PSB vs TIFF“)

Note – Large PSB files are STILL not visible within Lightroom Classic CC, version 7.2. — Adobe, are you listening? It’s been 7+ years since I reported/blogged about this!

Any how, I created several different DPI files (and file size(s)):

  • 100 dpi psb – 565.487 MBs
  • 100 dpi tiff – 773.447 MBs
  • 150 dpi psb – 1,277.122 MBs
  • 150 dpi tiff – 1,740.209 MBs
  • 200 dpi psb – 2,455.681 MBs
  • 200 dpi tiff – 3,093.681 MBs
  • 300 dpi psb – 5,212.382 MBs

and placed them on my FTP server for Keith to download.

Note – For those techno-geeks, PSB creates significantly smaller files, when compared to TIFF, but as mentioned above, Lightroom STILL can not produce thumbnails within light room.

[contentblock id=1]

Categories
Blogging Chester County Exton Information Photography Projects Reviews

Fine Art prints done local

Hay Bales at Stroud Preserve 2013
Some stylized hay bales taken in Chester County PA.

Recently, I was contacted by a client, asking if they could purchase two of my images, but as Posters prints (24×36 inches).

It is not usual for me to get Print orders from 5×7 to 11×17, but never something as big as 24×36!

I said Yes, and then began to panic, especially when I realized the two requested images were taken back in 2013, with my Canon EOS Xti/400D, which is only 10.1 megapixels!

Images taken at Marsh Creek State Park during a sunset.
Images taken at Marsh Creek State Park during a sunset.

Going Big

Starting on Google, I searched for suggestions on how to enlarge files without losing quality.

I knew from passing interests, that there were some specialized software for doing larger than ‘normal’ sizes, and some of them were interesting, but I could not justify the cost for just two images.

Eventually, I found a trick with just using Photoshop.

Basically, instead of enlarging it in one step, in my case 3888×2592 to 11096×7396 (or 285.39%), you do a series of incremental enlargements at 110%, up to the size needed.

I did it both ways, and you can see the difference!

But, one problem.

Too Big

The final working file size.

Hay Bales at Stroud Preserve 2013
Some stylized hay bales taken in Chester County PA.

The color image, “Marsh Creek sunset” is a 16-bit HDR (11096×7396 @ 300dpi) file weighing in at 1.38 GBs; the B&W images was not as bad, coming in at 403 MBs.

Dealing with files over 1 GB is not usual for me on my local computer, but I knew my Print house in New York City (NYC) had a 200MB limit (TIFF 8-bit sRGB, no compression).

With the color file, the first thing that I did was reduce it from 16-bit to 8-bit, which got me down to 466MBs.

Finally, after some design changes of the poster layout, I got both files down to about 378MBs, still far too large for NYC.

Finding a Printer

So I started to look at local places to print, and Brilliant Studios in Exton popped up.

After looking at their home page, I needed to visit!

My Tech Geek was kicking in!

During my days at Kodak and TV Guide, I had to visited many commercial print facilities around the United States and Canada, and on the surface, Brilliant Studio looked too good to be true.

So I emailed the main contact on the website, Bob Tursack, who also happens to be the CEO, with the information on my  poster project.

Changing Printers is not an easy thing, especially when it comes to color printing.

I’ve been using the same Printer in NYC for 10+ years, so switching to someone new, on such a unique project, from my point of view, was very risky.

During several email exchanges with Bob, I mentioned my file size issue, and to my surprised, I never got the idea there was a limit, which seemed odd considering the 200MBs limit in NYC.

I was also introduced to the term giclée printing, “fine art digital prints made on inkjet printers.”

Sounds like a marketing term, but when you dig deeper, there is a broader color range and papers.

Bob suggested the Hahenmule Baryta Gloss, “this paper has its own quality that is akin to traditional darkroom silver fiber papers”.

Now he had me hooked.

In my youth, I spent hundreds of hours in the darkroom, printing black & white photos, for hobby, school and work, so this was music to my ears!

After a day or so, late in the holiday season, Bob invites me in for Proofing.

I was excited.

Oh Wow!

I arrived at a building, that I had passed countless times in my 17+ years of living in Downingtown, questioning what I was going to see.

I walked into the reception area, and introduced myself to the receptionist.

While waiting, I looked around at various books on the tables and prints covering the walls.

My commercial printing background was kicking in.

Was this stuff being printed here?

I flipped through several art books, and the quality was amazing.

After several minutes, Bob arrived and escorted me back to the Proofing area.

Past the beautiful offices and sub-studios, and finally into the main printing area.

My jaw was on the floor!

Traditionally, high volume color printing is not a clean activity.

This place seemed spotless.

Even their 60+ year old Heidelberg offset printer looks brand new!
(If I remember correctly it was imported from Germany and rebuilt!)

Anyhow…

I snickered to myself as I entered the nearby Proofing booth, similar to the one I entered at Kodak, on my first day, to test for color blindness and how many places had I visited that had no concept of controlled lighting.

Part of me was in Geek heaven.

Needless to say, the Proofs looked great, and things that I worried about in my head, did not come up.

A couple of days later, I returned to pick up the final 24×36 prints, and they were gorgeous!

The size, print quality and paper all worked together to enhance the final pieces and I was extremely happy to present them to my client!

A Gem of a Neighbor

Again, I am blown away with this GEM of a Print house, right in my back yard, roughly 2 miles away!

I’m also amazed that I had never heard of them before, and they have been there since 2003!

As for pricing, it is definitely more expense then going with my NYC house, even with shipping, but now I have two options to present to future clients!

Update – A couple of days later, another new client wanted  two 11x14s, and I immediately sent the files to Brilliant Studios, and also got excellent prints! – I have printed these in the past, and the yellows tended to be a little ‘hot’, but when done via the giclée printing, they were still rich without being too vibrant.

Stroud Preserve – Research Center 2011
Abiah Taylor Barn from Stroud Preserve 2011

 

So with that being said, who wants a Fine Art Print?

[contentblock id=1]

Categories
Blogging Chester County Coatesville Photo Journal Rivers Streams Water Weather

A look back – Hibernia Park

Hibernia Park 315 - The Brandywine Creek West Branch, on the South side of Hibernia Park in Coatesville PA, after the heavy rains of September 30th from the remains of a Tropical Storm, Nicole.
Hibernia Park 315

It should be not secret at this point, to anyone living on the East Coast of the United States, that if it is not raining, just wait.

I will…

At the moment, Hurricane Joaquin is headed toward the East Coast…

Which means flooding… Somewhere…

It just so happens, that 5 years ago today, Tropical Storm Nicole, had just passed over the Chester County area, drenching the area, over night, with several inches of rain.

Silly me, I grabbed, my camera, and went out…

Out to Hibernia Park in Coatesville walking along the West Branch of the Brandywine Creek.

Hibernia Park 255
Hibernia Park 283
Hibernia Park 315
Hibernia Park 164
Hibernia Park 014
Hibernia Park 067
Hibernia Park 291

As you can see, there was a great deal of water, especially when you compare these two images, taken 7 months apart, during a Photography Meetup.

Hibernia Park Oct 10 vs Apr 11 - Two images taken 7 months apart in Hibernia County Park, Coatesville, Chester County PA.
Hibernia Park Oct 10 vs Apr 11 – Two images taken 7 months apart in Hibernia County Park, Coatesville, Chester County PA.

Do you remember Tropical Storm Nicole?

Are you ready for any type of storm?

What tips do you have to get through the next couple of days here in Chester County?

[contentblock id=1]

Categories
Blogging Equipment Filters Hardware Information Lens Photo Journal Photography Reviews

Review Canon EF 100-400mm f/4.5-5.6L IS II USM

Canon Logo
Canon Logo
Canon EF 100-400mm f/4.5-5.6L IS II USM
My Canon EF 100-400mm f/4.5-5.6L IS II USM for Insurance purposes.

On March 20, I purchased the new Canon EF 100-400mm f/4.5-5.6L IS II USM lens.

I did a great deal of research be the purchase, and sweated how I was going to pay for much a lens.

Then there was the justification, and knowledge that it will probably not be replaced in the Canon lineup for at least 10 years (in theory, based on the 14 year lifespan of the previous model), and it’s safe to assume that the actual camera/sensor will only get better, and my current camera bodies are on the low-end…

Anyhow, I got it!

Four monthly later, I thought I would add my thoughts into the mix.

Amazon Review

Shortly after receiving the Len, I wrote a Review on Amazon – “Hate It! – Going to Cost me More Money!“, which was not well received, because I was a little too sarcastic…

Guess I was still a little upset after my last attempt to buy something from Canon direct… another story…

But at the same time there are points that are valid, and I will add to them in this post.

As one of the commentators suggested, I was mocking the cost of the lens, which was out of the price range of most buyers.

I agree, this lens, on a pure cost alone, is well beyond most camera owner’s budgets, but as I pointed out, I have owned Canon for nearly 40 years (film and digital); it was part of a ‘mid-life crisis’ purchase and my first L-series lens. I had ‘earned’ it, damn it!

Continuing, I said that I also opening a new insurance rider with this particular lens in mind, which adds to the cost.

As mentioned, I have been using and collecting cameras for over 40 years, starting with my first camera, a Canonet from the early 1960s.

At this point, I have six camera bodies and over a dozen different lens, filters, tripods, etc., so I was more than a little surprised when putting an insurance list together, to see how much I have invested over the years, with the 100-400mm being the single biggest line item.

I did NOT take the lens out of the box until I notified my insurance company!

One point to my Amazon Review Subject line contention. (1-0)

The next was filters.

I have several 58mm and 72mm glass filters, but the 100-400mm being 77mm. I needed to buy at least a Circular Polarizer Filter, and again in reading reviews, as some stated, ‘if you are going to spend this much money, are you really going to put cheap glass in front’, plus the lens hood is special designed with this type of filter in mind!

I will also have to upgrade my square 85mm filters to 100mm, but I should have invested in a 100mm system to begin with. My bad.

Another point to my Amazon Review Subject line contention. (2-0)

As I started to review my first images in Adobe Lightroom, using the 100-400mm on my T5i (700D), I did notice ‘things’ did appear to be crisper, and the first image I pulled up, I did say ‘Holy Sh1t!”, but since then, not in all cases.

I’ve shot in direct over-head sun, 1/1000+ at f8+ where it should be sharp, but found some softness, and other times, and I’ve gotten down to 1/30 full open aperture, and razor crisp – all hand-held!

With some of the close-up testing that I’ve done, I am seeing some fraying on some edges, that does not appear to be chromatic aberrations that I am accustomed to seeing.

I am getting the distinct feeling that the sensor (APS-C) is having problems with the resolution detail.

I bought this lens, with the knowledge that it will probably not be replaced in the Canon lineup for at least 10 years (in theory, based on the 14 year lifespan of the previous model), and it’s safe to assume that the actual camera/sensor will only get better, and my current camera bodies are on the low-end…

I will not really see the beauty of this lens without a serious upgrade to a full frame sensor camera body, or put another way, future purchase, future cost.

Point 3 for my Amazon Review Subject hypothesis.

After 4 months of Ownership

Now that I have used the 100-400mm on my T5i (700D) for the past 4 plus months, I wanted to do a follow-up Review, and change the Amazon Review from a 1 Star rating.

Auto-Focus & Ring Placement

In my original commentary on Amazon, I talked about the Auto-Focus (AF) being very fast, but I have also noticed that in fast close-up situations, it can fail very quickly while trying to track/pan with the subject, small insects in my case, carpenter bees.

During the early spring, they fight/protect their nests at high-speed dive bombing attacks, so trying to focus quickly can be difficult at best.

Okay, just switch to manual focus, and focus across on the plane.

No problem, for a shot or two.

For me, the problem is the placement of the Focusing ring, it is the inner most ring, right next to the body.

I have big hands and fingers, so while I am trying to focus, I can not easily steady the lens, the balance is off.

Not that it is going to make any difference, but I would have preferred the Focusing ring closer to the front of the lens to help with stability, with the Zoom ring in the middle and the Zoom touch adjustment ring in the rear.

By the way, I’m not a big fan of the Zoom touch adjustment ring.

Seems like too much real estate on the barrel for too little function, for me.

Lens Envy

I shot event photography, and the range on the 100-400mm is great!

But at the same time, it attracts attention.

I don’t mind, occasionally chatting with folks at an event, but how many times do you really want to hear “That is a big lens!” or “I have Lens Envy”.

This being my first off-white, L-series lens, I guess it might come with the territory…

Conclusions, so far…

The easiest answer is Yes, if you can afford it.

As I have hopefully illustrated, there can be more expenditures beyond the base price, and depending on how you have purchased your older equipment, the amount will be a variable.

My two biggest mistakes up front –

1) I should have had insurance earlier. Thankfully, in 35+ years, I have only ‘killed’ one camera (Canon A-1 (film)) and one Lens (70-300mm f4-5.6). I’ve been VERY lucky!

2) Filters – When I was looking into square filter systems, I thought long and hard about 85mm vs 100mm filter systems, and finally bought a 85mm system, and now I’m kicking myself…

Looking into the future, I can’t wait to pay off this puppy and get a new camera body!

Would I buy this lens again?

I hope not…

I LOVE the one I got!

[contentblock id=1]

Categories
Blogging Ideas Thoughts

Logophile

Logophile

Yes, I am a Logophile.

“A lover of Words”…

Why not? – They area all around us, every day…

Spoken, written, implied…

So many of them…

Some are able spell these various words, without thinking twice, but for some of us, the older generation, remember being forced to look words up in a physical dictionary.

Being dyslexic, some form of dictionary lay by my side when ever I was writing something.

Yes, I would find the word in question, without issue,   because of the alphabetization of all those words, but every now a then, my eye would wander, and I would be caught up in just browsing…

Flipping the page, eyes running down the columns searching for something to stand out…

Never know what it was, until it was “found”…

A new knowledge nugget implanted into the neurons…

Only to start again!

Anyhow, during my morning newsfeed/wall reading, I came across “Letter of Recommendation: The Oxford English Dictionary” by Maria Bustillos of the New York Times Magazine, in which she expresses her ‘hidden’ desire to find the words within words, or Etymology.

Another cord was struck.

Having a degree in Physics, generally forces one to learn many ‘roots’ for various words, or studies.

No problem there, especially with my dictionary by my side.

My dictionaries also provided security.

During my early days on the internet, I used the words on the spines of my dictionaries, as Passwords…

I never had to write them down, but they were always available.

My favorite, zymurgy.

Over the past couple of years, I have really begun to start listening to more books, then actually ‘reading’, and for me, it has opened a whole new world! (60+ books in 3 years)

But I still, every now and then, have to return to my trusty Dictionary!

One of my favorites, especially as it pertains to this post, “The Meaning of Everything: The Story of the Oxford English Dictionary” by Simon Winchester.

In this book, the author introduces us to the complexity of creating the Oxford English Dictionary (OED), and one is left with nothing by amazement that such at task could have been done!

So as you go about your day, and use your words…

Remember to choose your words carefully…

They have been around since then early days of humanity, and may carry ideas that you are not aware of…

So have some fun and just look it up!

[contentblock id=1]