Categories
Blogging Chester County Coatesville Covered Bridges Photo Essay Photo Journal Photography Projects Reference

Speakman #1 Covered Bridge – 4 years later

While I was out on a GPS drive yesterday, I found myself very close to Speakman #1 Covered Bridge, and having several hours before the kids got home, I decided to stop by and do a follow-up session.

The last time I was at the bridge was back in 2010, and as I got closer, I started to notice signs saying the bridge was closed.

This made me very concerned, especially since we’ve had several harsh winters since I was last there.

As I approached the bridge, I felt rather depressed when I began to see barriers in front of the bridge opening.

Bridge Closed signs at Speakman #1
Bridge Closed signs at Speakman #1 in Chester County PA.

While I was getting out of the car, I was wondering what kind of damage had happened, when I was shaken from my thoughts by a man in a pickup truck.  He asked if I was fishing to which I raised my camera.

The truck pulled into the area in front of the bridge and the man got out and started chatting about the bridge in general.

I explained to him that the last time I’d been down here was in 2010, and that I was rather shocked to see the general appearance of the bridge.

At this point, Lawrence introduced himself and said the bridge had been closed for about two years due to damage by a truck hauling steel plates through the bridge.

Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.

Apparently, a driver was heading southbound on Frog Hollow Road, when a steel plate shifted as he turned right onto Covered Bridge Road, severely damaging the South West entrance post.

Lawrence continued to tell me stories about the local area and the bridge as we walked around, inspecting the damage.

In this picture, you can still see some of the fire damage cause by some local boys.  Notice the char in the diagonal crossbeam.

Arson damage at Speakman #1 in Chester County PA. - Notice the 'new' siding.
Arson damage at Speakman #1 in Chester County PA. – Notice the ‘new’ siding.

From the outside, looking upstream, you can see the boards that were replaced.

Truck damage to Speakman #1 covered bridge in Chester County PA.
Truck damage to Speakman #1 covered bridge in Chester County PA.

I asked when the bridge was going to be fixed, but that remains to be seen. There appears to be an argument between the local townships and the state about who is going to pick up the restoration cost.

When you go to the upstream side of the bridge, you can see where the tall grass has gotten stuck between the boards during several recent floods.

Flood damage to Speakman #1 covered bridge in Chester County PA.
Flood damage to Speakman #1 covered bridge in Chester County PA.
Flood damage to Speakman #1 covered bridge in Chester County PA.
Flood damage to Speakman #1 covered bridge in Chester County PA.

If you look very carefully at the above image, you can see how the left vertical steel I-beam is bent from all the ice and trees hitting it.

Needless to say, it is easy to see that Speakman #1 Covered Bridge needs some major restoration if it is going to last into the future.

I hope by posting these images, I can make other people aware of what needs to be done.

If you have any contacts, please let me know!

Thanks in advance,

[contentblock id=1]

Categories
Adobe Blogging Clean Up Photography Reference Software Tech Talk Tips

Playing with a 10.6+ GB File!

This morning, I started to “stitch” together a panoramic photo that I had taken the other day in Dowlin Forge Park, right here in Downingtown.

It is a series of (28) Canon RAW files (cr2) that were taken with a Canon T5i/700D, imported into Lightroom 5.3, and merged into a straightforward panorama image in Photoshop CS 6.

I knew this was going to be a large file from previous experience, but I have not tried yet to really push my new computer setup, so…

The actual merge of the (28) 16-bit files took about 3-4 minutes, which was A LOT better than last time, where I had to break-up the (42) files into groups of 10, merge them into one file, and repeat until all the files were merged.

Once the merged file was in Photoshop, with all 28 layers showing, my new machine was not even breathing too hard.  Even with Lightroom and several Chrome instances, I was still only pushing 85% physical RAM and the CPU spiked at 15%!

From there, I tried to “Save As” a Standard Adobe PSD, and got the standard error dialog, showing the 2GB file size limitation.

Nothing new there…

Then I tried a “Save As” as an Adobe TIFF file, and this time the computer took a great deal longer, 5+ minutes, before there was an error, and during that time, Photoshop created a 10.6+ GB file tmp!

10.6 GB Adobe TMP file
10.6 GB Adobe TMP file

To date, this is the single largest file that I have “Saved” in Photoshop!

Finally, I tried saving the file as a Standard Adobe PSB file, which is still a large file at 3.3+ GBs!

Main Adobe PSB file w/o Flatten
Main Adobe PSB file w/o Flatten

Time to Flatten some Layers!

With the Main PSB file open, I Flattened the Layers into 1, and did a “Save As” a PSB and then Re-Opened the Main PSB file, Flattened, and “Save As” again as TIFFs, and was very happy to see both files sizes were nearly identical at 638 MBs!

Comparison when Flattened
Comparison when Flattened

Conclusion

I conducted this test mostly out of personal curiosity and to see if files have remained consistent since the last time I did this experiment.

I expected the file size to go up, mainly because I was using 27-28 MB files created with the Canon T5i/700D vs 8-9 MB files with the Canon XTi.

If I were to estimate, the same 46 shoots done in 2011 could easily reach 6 GBs as a PSB file, and maybe create a 20-30 GB temp file at the same time.

Be sure that you have enough scratch disk space before you start.

It should be obvious that if you know a file is going to reach over 4 GBs, save it out as a PSB and go from there in the rest of your workflow.

The current maximum file file for an Adobe PSB is 4 exabytes – 300,000 x 300,000 pixels – 350 x 350 feet, which should keep you.

It is also nice to see that after Flattening, both PSB and TIFF files appear to be the same size.

Personally, I would keep the TIFF files, mostly because TIFF is NOT a proprietary file format, and in the future, if I want to move the file into another program, it will be easier.

Although I wrote my first post on PSB vs TIFF several years ago, I have yet to find out what IS all the Un-Saved data?

Duplicate “colors?” Non-Human readable code?

If you happen to know, please let me know.

I’m just very curious!

And finally, it should be noted, just like last time, the 2 PSB files do NOT show up in Lightroom, so you have to remember that they are there.

The TIFF file that was created, after Flattening all the Layers, DOES show up in Lightroom.

Adobe Bridge CS6 (5.0.2.4 x64) is able to show the Flattened PSB and TIFF, but NOT the larger Un-Flattened 3.3+ GB PSB file.

Hope you enjoyed my little file size observations.

If you have any questions or answers, please let me know!!

[contentblock id=1]

Categories
Announcements Featured Milestones Online Life Photo Journal Photography Published

Published in County Lines Magazine!

As Seen In - County Lines Magazine
As Seen In – County Lines Magazine

I’ve been rather low-key about this, and I was going to say something yesterday, but…

I am happy to announce that I have 5 images appearing in the April 2014 edition of County Lines Magazine, including a two-page opening spread on our little town of Downingtown – “Small Town Heaven“!

My main sunset image also appears on the County Lines website, in the feature section, but to be honest, I LOVE the print edition better!

Here is a PDF version of the article!

The original image was a hand-held panorama and really needs to be seen wide, to get the full feeling, and the two-page printed version does this well!

I want to really thank all the folks at County Lines for their hard work, and especially Jaimielynn Cooper who was such a delight to work with during this project!

So look for the April Print Edition, which also happens to be the Wedding Edition, at your local newsstands and bookstores in Chester County, Montgomery, Berks, Lancaster, New Castle and Delaware counties or by subscription.

Thanks again to all those involved!

[contentblock id=1]

Categories
Adobe Chester County Downingtown Panorama Photo Journal Photography

Dowlin Forge Park panorama 01

This shot was done by combining (28) images, and a little stitching together in Photoshop…

This was the file that I was talking about the other day… That 10.6+ GB job

Well, after more play, including Zoomify, here it is!! <<<

Be sure to use the Controls at the bottom to Zoom in an Move around!!

Full Screen is even better!

[contentblock id=1]

Categories
Announcements Flickr Milestones Online Life Photo Journal Photography

200K Flickr views!

Well folks, it took about 4 years to reach the first 100,000 Flickr view, and the second 100,000+ view took a little over 54 weeks!

200K Views on Flickr!
200K Views on Flickr!

Guess that is called progress!

Thanks to all those that have visited, commented and linked my images!

[contentblock id=1]